Customization: | Available |
---|---|
After-sales Service: | Online |
Warranty: | 1 Years |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payment in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
![]() |
Model | CPCD-50 |
Rated Load Capacity | 5000kg | |
Loader Center | 500mm | |
Lifting Height(A2) | 3000mm | |
Free lifting Height(A4) | 160mm | |
Fork Size(LxWxT)(B1) | 1220x155x55mm | |
Mast Tilting Angle(F/R) | 6/12 | |
Length(without fork)(B4) | 3248mm | |
Overall Width(C1) | 1480mm | |
Mast Hight After Mast Fall(A3) | 2275mm | |
Lift Height(A1) | 4217mm | |
Overhead Guard Height(A5) | 2265mm | |
Turning Radius(C2) | 2930mm | |
Front /back Overhang(B2) | 560/588mm | |
Right Angle Channel Width | 2900mm | |
Wheelbase(B3) | 2100mm | |
Track(F/R) | 1180/1190mm | |
Ground Clearance(Mast) | 175mm | |
Ground Clearance(Car Center) | 243mm | |
Front Tire | 300-15 | |
Rear Tire | 700-12 | |
Travel(Full/No Load) | 21/21.6km/h | |
Lifting(Full/No Load) | 490/510mm/s | |
Lowering(Full/No Load) | 420/400mm/s | |
Drawbar Pull(Full/No Load) | 3000/1300kg | |
Gradeability(Full/No Load) | 19/20% | |
Total Weight | 6780kg | |
Battery(Voltage/Capacity) | 12/80V/AH | |
Engine Model | Xinchai 4D35ZG31 | |
Rated Pover/Speed | 60/2200Kw/rpm | |
Max.Torque/Speed | 300/1800N.m/rpm | |
Work Pressure | 17.5Mpa | |
Fuel Tank Capacity | 60L | |
Tranmission Type | Mechanical |
Digital instruments more intuitive and accurate; Easier to operate the forklift. |
Noise reduction type cushion used to reduce vibration by 20% Sound insulation cotton is installed under the pedal, the noise is reduced by 5%. |
Brake arm increased by 40mm; the pedaling force is reduced by 10%, the braking effect is increased by 20%, and the operation is lighter. |
Oil dispersed The fin-type oil-dispersed fin structure can form a strong turbulent flow of the fluid, improving the heat transfer efficiency. Its heat transfer coefficient is also 5-10 times higher than that of the tube-type heat sink. |
Toyota Seat Ergonomic design minimizes operator long-term work fatigue, increases operating space, increases work efficiency, and enables the driver to operate the forklift more comfortably. |
Masts Independent production of masts, which can be produced according to customer requirements. 2x3m stage mast 3x4.5m stage mast |
Increase load capacity by 10%, increase speed by 10%, greatly improve work efficiency. |
LED lights enough light, can provide enough light source continuously. |
Stainless steel rear tow hook, strong and durable. |
One-piece welding the use of boltless, 20% increase in strength, increased safety, rugged construction allows the truck to operate on uneven ground and long curved roads, to withstand the most demanding cargo handling operations. |
High-quality tilting cylinder ensures the stability of the mast. which has been tested before leaving the factory. |
The engine (with option to meet Euro5/3,EPA4) It uses direct injection technology to optimize the combustion chamber structure . Low speed, high torque and high power, high efficiency fuel injection pump, fuel system adopts electronically controlled distribution pump technical route, stable idle speed, low noise and emission meets National III standard. |
ATLAPEX Machinery is a leading international specialty machinery and parts manufacturer & exporter since 2007 , with its manufacturer location and oversea sales office located in Pingdu, Qingdao, covering an area of more than 50, 000 square meters. It is divided into three major factories, which accounts for R & D department and production plants. The company has more than 400 employees, including 55 engineers dedicated in new product innovation in the construction machinery industry.
ATLAPEX Machinery with an annual capacity of more than 15000 Compact wheel loaders, Wheel loader, Backhoe loader, Skid-steer loader, excavator, forklifts, and concrete mixer, All the products meet all the internationally required manufacturing standards and Quality control certifications including CCC, ISO 9001, ISO 16949, CE and EGS etc.Our industry knowledge and vast experience can make you easier in the tire business. Welcome customers abroad and domestic for business communication.